Mold can affect any home. Its black spots can be seen clearly. It grows in damp and moist places. The microscopic spores of mold are released in the air and cause health problems in the people living in the house. You will suffer allergic reactions like sneezing, runny noses, and skin irritation. If it spreads to a large area, you will need professional mold removal services. Mold remediation and prevention should start early before it spreads all over the house. How can you remove mold?
First, assess the damage caused by the mold. Investigate all areas where you suspect mold growth. The type of remediation solutions you use depends on the type of mold, how far it has spread, and how deep it has spread inside the wall. If it has spread wider and deeper, you may even have to remove the plaster and go for the renovation work. If it is still on the top surface only, a strong cleaning solution will solve the problem. Keep in mind that some types of mold are toxic. Wear safety gears when cleaning such mold. All parts of the home that are not being cleaned must be covered completely. The cleaning should be done in such a way that there is no further spread of mold spores in the air.
If the mold has reached deep inside the insulation, you have to break the drywall to remove mold from the internal structural parts. Make sure you do not cut the electrical wires and plumbing items that run through the walls and floors. You will need special mold cleaning solutions. Prepare and apply these solutions as instructed by their manufacturers. Once the mold removal process is complete, take care of cleaning the area. Use a vacuum cleaner to remove the loose debris. Once the vacuuming is over, use a bleach water solution to clean the vacuum machine’s dust collecting chamber, hose, and attachments.
Dry the cleaned area using a fan and dehumidifier. It may take 1-3 days to ensure all mold affected parts are dried completely. Recheck to ensure there is no more mold. Now you will have to apply the primer and paint on the wood to prevent future mold growth. Use a mildewcide containing latex paint. Install new insulation if the old one was heavily infested with mold and has been removed. Install the drywall and complete the finishing. To prevent a future return of mold, keep the area free from moisture. Prevent water leakage and dampness. Check the area regularly to ensure mold is not growing. If you do not want to handle this cleaning process yourself, call a professional mold removal company.